Door repair & adjustment · Atlanta & Metro Atlanta, GA
We fix doors that rub, drag, drift open or won't latch, inside or out: door hinge repair, strikes moved, edges planed, worn handles replaced. We find out why the door stopped fitting first, so the fix holds through humid summers.
What we do
These are the four door problems we fix.
We find where the door binds, then shim or tighten the hinges, or plane and reseal the edge if swelling has made it too wide for the frame.
Stripped hinge screws are swapped for longer ones that bite into the framing, and bent hinges are replaced so the door hangs square again.
A strike plate that no longer lines up is moved or filed, and worn knobs, levers and deadbolts are replaced with hardware you pick.
Worn weatherstripping and door sweeps on exterior doors are replaced, and bifold or sliding closet doors that jump their track are realigned or given new hardware.
When the hardware or the seal is the problem: Door knob replacement · Door weather stripping replacement
How we work
We swing the door, check the gaps around it, and look at the hinges, frame and floor. A door rubbing at the top corner needs a different fix from one that swelled in a wet season, and you get the price before we start.

We start with adjustment: tightening, shimming, moving a strike or planing an edge. New hardware goes into the existing holes where possible, so the door and frame aren't left with extra patches.

Before we leave, the door should swing freely, close without a shove and latch on the first push. We open and close it with you watching, then sweep up any shavings.

Why homeowners choose us
We adjust the door you have before suggesting anything be replaced.

The quote
Door work is priced per door once we've seen what's wrong. A quick hinge adjustment and a planed, resealed edge are different jobs, and the price we agree before starting reflects which one yours needs. Starting at $110 per door. Labor only; materials are extra, and the final price is confirmed on site before any work starts.
Good to know
Have a question about your job? Call or text (770) 746-7207 and we'll talk it through with you before you book anything.
Our work is repairing and adjusting the doors you already have. Hanging a new pre-hung door, fixing a frame pushed out of square by settling, or cutting a new opening is a job for a door installer or carpenter, and we'll tell you that at the estimate.
Yes. Stripped screw holes are filled with wood and redrilled, or the top hinge gets a longer screw that reaches the framing behind the jamb, which also pulls a sagging door back into line. A jamb split or torn at the hinge is a carpentry repair, not a hinge adjustment.
Wood swells with humidity, and Atlanta summers are humid. If a door rubs only part of the year, we adjust the hinges first; planing comes last, and any edge we plane is sealed so it doesn't soak up moisture again.
We can replace a worn knob, lever or deadbolt with new hardware and realign the strike plate so the bolt slides in easily. Rekeying, lockouts and high-security locks are work for a locksmith.
Yes. The top and bottom pivots are re-seated and adjusted in their brackets, the top guide is set back in the track, and a worn pivot, guide or bent track is replaced.
Worth reading first
A door sticking at the top usually means a sagging hinge or summer humidity. How to tell which, the simple fixes, and the signs that point to something bigger.
Read it → Small jobsHoney-do list handyman services work best when the list is clear. How to write one a handyman can quote in a single visit, and what to leave off.
Read it →Where we work
Based at 8735 Dunwoody Pl Ste R, Atlanta, GA 30350, serving the communities below.
Live just outside these towns? Give us a call and tell us where you are, and we'll let you know if we can get to you.
Free estimate
Send the form and we'll call you back during business hours to talk through the job and set up your free estimate.