A room with crown molding, wainscoting and oak French doors by a staircase

Trim & small carpentry · Atlanta & Metro Atlanta, GA

Trim carpenter in Atlanta for baseboard repair and casing

Baseboard installation and baseboard repair, door and window casing, crown molding, quarter round and simple shelving, plus the dings, gaps and split pieces that make a room look unfinished. Every joint is cut on site.

Miters cut and fitted on site Nail holes filled and caulked, ready for paint Repairs or new runs, room by room
FreeEstimates on every job
14Kinds of repairs and installs
11Towns across metro Atlanta
6Days a week, Monday to Saturday

What we do

The carpentry we take on

These are finish-carpentry jobs sized for a visit or two, not framing or structural work.

Baseboard and quarter round

New runs after flooring goes in, or damaged sections replaced and blended into what is already there.

Door and window casing

Loose, cracked or mismatched casing is pulled and replaced, with corners that close without a visible gap.

Crown molding

Crown molding installed in a room or hallway, with inside corners coped, which holds tighter than a caulked miter.

Shelves and small wood repairs

Closet shelving, a simple wall shelf, a split stair tread cap or a chewed window sill repaired or rebuilt in wood.

On the same visit as trim work: Interior painting & touch-ups · Door repair & adjustment

How we work

How we handle a trim job

We look at the room and measure

Tell us what you want done and, if you can, send photos. For new trim we confirm the profile and the lengths needed, and for repairs we check whether the existing piece can be matched. The estimate is free.

A room with chair rail, wainscoting and crown molding

Cutting and fitting on site

We set up a cutting station outside or in the garage where possible, cut each piece to the wall in front of us, and fasten it level and tight. No wall is perfectly straight, so we scribe and adjust rather than force a joint.

A miter saw with freshly mitered trim offcuts, a pencil and a tape measure

Filled, caulked and ready for paint

Nail holes get filled and the seams against the wall get a thin line of caulk. If painting is part of the plan, we can paint the new trim during the same visit.

A finished corner of white crown molding

See more of our work

Why homeowners choose us

How we do trim work

Good trim is about the corners, and we take the time to get them right.

  • Free estimates
  • Inside corners coped, not just mitered and caulked
  • We match existing profiles where they can be found
  • Price agreed before any work starts
  • Painting the new trim can be added to the same job
  • Dust kept to the work area and cleaned up at the end
Drywall seams and patches covered in joint compound, not yet sanded

The quote

How we price trim and carpentry

Trim is priced by the linear footage and the number of corners and cuts. Starting at $175, labor only; the trim itself is extra, whether you buy it or we pick it up, and the final price is confirmed on site before any work starts.

Always included

  • Measuring, cutting and installing on site
  • Filling nail holes and caulking seams
  • Hauling away the offcuts and old trim

What changes the number

  • Linear feet of trim and how many corners it turns
  • The profile and material, from primed MDF to hardwood
  • Whether old trim has to be removed first

Good to know

Trim and carpentry questions

Have a question about your job? Call or text (770) 746-7207 and we'll talk it through with you before you book anything.

Can you match the trim I already have?

Yes, where the profile is still made. Standard baseboard and casing profiles are sold, and we check before quoting. When an old profile is no longer made, we show you the closest options so you can decide.

Is it worth repairing baseboard, or should it be replaced?

A dented or loose run can be refastened, filled and repainted. A section that is split, water-stained or swollen at the bottom is replaced, matched to the profile next to it. We tell you which at the estimate.

Do I need a trim carpenter or a handyman for baseboard repair?

Either can, if the job is trim. We repair and install baseboard, quarter round, door and window casing and crown molding, and fix small wood pieces like a stair tread cap. We don't build custom built-ins, staircases or cabinets.

Do you supply the trim or do I?

Either works. We can pick up the material and add it to the estimate as a separate line, or install pieces you have already bought once we confirm there is enough.

Do you build decks, frame walls or fix rotted structure?

No. Framing, decks, and anything that carries weight or involves structural rot is outside what we do. We stick to finish carpentry, shelving and small wood repairs.

Where we work

Trim & small carpentry across Atlanta & Metro Atlanta, GA.

Based at 8735 Dunwoody Pl Ste R, Atlanta, GA 30350, serving the communities below.

Live just outside these towns? Give us a call and tell us where you are, and we'll let you know if we can get to you.

Our office

Atlanta

8735 Dunwoody Pl Ste R, Atlanta, GA 30350
(770) 746-7207

Open in Google Maps

Free estimate

Tell us about your trim project for a free estimate

Send the form and we'll call you back during business hours to talk through the job and set up your free estimate.

(770) 746-7207Call or text
8735 Dunwoody Pl Ste RAtlanta, GA 30350
Free estimate Call now