Ceiling fans · Atlanta & Metro Atlanta, GA
A fan that wobbles, hums, clicks or looks dated comes down, and the new one goes up in the same spot. We also replace a ceiling light with a fan where the box above is rated to carry one.
What we do
The wiring is already in the ceiling. The work is taking the old fan down safely, checking what it hung from, and hanging the new one so it runs quietly.
The old fan, its bracket and canopy come down; the new bracket goes onto the box and the new fan is assembled, wired to the same connections and hung.
A ceiling light can become a fan only where the box above it is made and marked for a fan. If it is not, we stop and tell you before the fan goes up.
Loose blade screws, a bracket that was never tightened, or blades out of balance make a fan wobble and click. We tighten, check and balance the blades on every fan we hang.
A fan's own light kit, or a remote receiver that comes in the box with the new fan, is fitted as part of the same job.
For light fixtures, and the other small jobs on the same list: Light fixture replacement · General home repairs
How we work
Tell us how many fans and which room each is in, and send us the product page of the fan you have bought so we can check it. A photo of the old fan or light, texted to our number, helps. The estimate is free.

With the breaker off, the old fan or light comes down and we look at the box it hung from. A new fan goes up only on a box rated for a fan, on the wiring already there.

We run the fan on every speed, both directions and with the light on, and balance the blades until it runs steady.

Why homeowners choose us
A ceiling fan is a heavy, spinning thing over a bed or a couch. What it hangs from matters more than how it looks.

The quote
It is priced per fan, by the room and the ceiling it hangs from. You hear the number before we start. Starting at $150 per fan. Labor only; materials are extra, and the final price is confirmed on site before any work starts.
Good to know
Have a question about your job? Call or text (770) 746-7207 and we'll talk it through with you before you book anything.
Where a fan or a light already hangs, yes: the new fan goes up on a fan-rated box already wired. A box not rated for a fan has to be changed by an electrician first.
No. That needs a new box and new wiring, which is an electrician's job. We replace a fan or a light that is already there, on a box already wired and in use.
A box made for a fan is marked inside, with words like "acceptable for fan support" and a weight limit, and it is fastened to the framing or to a brace between the joists. A light-only box, or any box held only by the drywall, is not one. We check it with the power off before the new fan goes up.
No. New switches and wiring are an electrician's work. A fan that comes with a remote can be run from it without a new switch.
Where the box is sound, yes. Loose blade screws, a loose bracket and blades out of balance are the first things we check. If the box itself moves, it may not be rated for a fan, and we tell you before rehanging anything.
We tighten and balance a fan that wobbles or clicks, and fit the light kit or remote that comes in the box with a new fan. When a fan hums, struggles to start or runs at one speed only, the fault is in the motor, its capacitor or its switch; we do not repair those parts, so we replace the fan on the box already there. A hum can also come from a dimmer on the fan's circuit, which a new fan will not cure.
Where we work
Based at 8735 Dunwoody Pl Ste R, Atlanta, GA 30350, serving the communities below.
Live just outside these towns? Give us a call and tell us where you are, and we'll let you know if we can get to you.
Free estimate
Send the form and we'll call you back during business hours to talk through the job and set up your free estimate.