A stainless fold-down grab bar on the wall beside a toilet, with a straight bar inside the glass shower

Grab bars & senior safety · Atlanta & Metro Atlanta, GA

Grab bar installation in Atlanta, for a steadier bathroom

A parent coming home from the hospital, or a fall in the shower? Tool Box Pros does grab bar installation across Atlanta: bars by the tub, shower and toilet, fixed into studs or anchors rated for grab bars, each checked to hold firm.

Fixed into studs or anchors rated for the load Placed at the height that suits the person using it Each bar checked for a firm hold before we leave
FreeEstimates on every job
14Kinds of repairs and installs
11Towns across metro Atlanta
6Days a week, Monday to Saturday

What we do

Where a grab bar helps most

Wet floors and low seats are where a steady hand-hold matters most. Bars for several of these spots can go up in one visit where the job allows.

Beside the tub

A bar on the long wall and one at the entry give a hand-hold while stepping over the rim, where wet tile is slippery.

In the shower

A straight or angled bar inside the stall helps with turning, washing feet and stepping out. It goes into the framing behind the tile, or an anchor rated for grab bars, never only into the tile.

Next to the toilet

A wall bar, or a fold-down bar where there is no side wall, makes sitting down and standing up easier without leaning on the sink or the towel rack.

Hallways and entries

A short bar by the bedroom door or inside the entry helps with balance where there is nothing solid to hold.

Can be done on the same bathroom visit: Tub and shower recaulking · General home repairs

How we work

How a grab bar visit goes

Tell us who the bars are for

On the phone or through the form, tell us which rooms, how many bars, and a little about who will use them: a tall adult, a parent with a walker, a child. Photos of the walls, texted to our number, help. The estimate is free.

A bathroom with a wood vanity, a glass shower and a vertical grab bar beside the toilet

We find solid backing first

We locate the studs behind the drywall or tile and mark the bar where it lines up with them. Where no stud falls in the right place, we use anchors made and rated for grab bars, not ordinary drywall plugs.

A wall-mounted swing-up grab bar beside a toilet, with a grab bar built into the toilet paper holder

Mounted, sealed and checked

In wet areas the screw holes are sealed so water stays out of the wall. Then we check every bar for a firm hold before we call the job done.

A vertical fold-up grab bar on a white wall beside a toilet

See more of our work

Why homeowners choose us

Why grab bars are worth doing right

A bar that looks right but pulls out under a fall is worse than none. Everything about this job comes down to what the screws go into.

  • Free estimates
  • Bars fixed into framing, or anchors rated for grab bars
  • Placed for the person who will use them
  • Price agreed before any work starts
  • One bar or several, in one visit where the job allows
  • Open Monday through Saturday, 8 AM to 6 PM
A vertical grab bar beside a toilet in a bathroom with a frosted window and a glass shower

The quote

What grab bar installation costs

We price grab bars by the number of bars and the walls they go on, and you get the number before we start. A bar you already bought is fine; we check that it is made to be a grab bar, not a towel bar. Starting at $125 per bar. Labor only; materials are extra, and the final price is confirmed on site before any work starts.

Always included

  • Finding studs or setting rated anchors for each bar
  • Mounting, sealing the holes in wet areas, and a check that each bar holds firm
  • Cleaning up the dust before we leave

What changes the number

  • How many bars, and in which rooms
  • What the wall is: drywall, ceramic tile, stone or a one-piece tub surround
  • Whether you supply the bars or want us to bring them

Good to know

Grab bar questions

Have a question about your job? Call or text (770) 746-7207 and we'll talk it through with you before you book anything.

My mother comes home from the hospital this week. Can you put grab bars in before she does?

When the calendar has an opening, the visit is set within one working day, Monday to Saturday, 8 AM to 6 PM. Tell us the day she comes home when you book, and text a photo of the walls by the tub, shower and toilet to (770) 746-7207 so we bring the right anchors. If her hospital or therapist said where the bars should go, tell us and we set them there.

Someone fell in the bathroom. Where should the first grab bar go?

Usually where the fall happened: stepping into or out of the tub or shower, or getting up from the toilet. We look at how that person moves in the room and show you the spot before we drill. A towel bar, a soap dish or a suction-cup handle is not a grab bar and will not hold someone who slips.

Can a grab bar be installed where there are no studs?

Yes. A bar does not need a stud behind both ends; anchors built and rated for grab bars hold it in the hollow part of the wall. We show you where each screw will go before the first hole.

Can a grab bar go on a fiberglass or acrylic tub surround?

Sometimes. A one-piece surround can have a gap between the shell and the wall behind it, so it needs different hardware or a different spot. We look at it first, and if we cannot fix a bar there safely, we tell you rather than mount one that only looks secure.

Will you need to tear out tile or open the wall?

Not for a grab bar. On ceramic or porcelain tile we drill at each mounting point with a bit made for it and fix the bar into what is behind; if a wall cannot take a bar safely, we tell you before we drill. Rebuilding a wall, moving plumbing or remodeling the bathroom is not work we take on.

What height should the bars be?

It depends on who uses them. We set the bar where that person's hand naturally lands while sitting, standing or stepping in, and we show you the spot before we drill so you can move it.

Which grab bar should I buy?

One sold as a grab bar, with its weight rating printed on the package; a towel bar or a suction-cup handle is not one. Where studs sit the usual 16 inches apart, a level bar of 16 or 32 inches can catch a stud at each end; a 24-inch bar mounted level lands one end on a stud and the other on an anchor rated for grab bars, or goes on at an angle across two studs. A photo of the wall, texted to our number, helps us say what hardware it needs.

Do you install grab bars in Atlanta condos and apartments?

Yes, inside the unit. Behind tile in a condo bathroom there may be metal studs rather than wood, so a photo of the wall texted to our number helps us bring fasteners made for them; if a wall cannot take a bar safely, we tell you before we drill.

Can you replace a towel bar with a grab bar?

Yes. A towel bar is not made to carry a person's weight, so we take it down and put a real grab bar on solid backing in its place, filling the old holes where the wall allows.

Do you install grab bars for seniors, and do other safety work in an older parent's home?

Yes. Grab bars are this page's work, and around the same visit, where it is on our list: a door that sticks or will not latch, a loose knob or lever, worn caulk around the tub, a fixture swapped for a brighter one on a box already wired. We do not do stair lifts, ramps, plumbing or bathroom remodeling, and we say so before the visit.

Where we work

Grab bar installation across Atlanta & Metro Atlanta, GA.

Based at 8735 Dunwoody Pl Ste R, Atlanta, GA 30350, serving the communities below.

Live just outside these towns? Give us a call and tell us where you are, and we'll let you know if we can get to you.

Our office

Atlanta

8735 Dunwoody Pl Ste R, Atlanta, GA 30350
(770) 746-7207

Open in Google Maps

Free estimate

Get a free estimate for grab bars in your home

Send the form and we'll call you back during business hours to talk through the job and set up your free estimate.

(770) 746-7207Call or text
8735 Dunwoody Pl Ste RAtlanta, GA 30350
Free estimate Call now