There are two ways to get cables from a wall-mounted TV down to the outlet and the devices below it. One runs them inside the wall cavity, through holes cut behind the screen and near the floor. The other runs them on the surface of the wall, inside a slim cover that is painted to disappear. Tool Box Pros only does the second. It leaves the wall intact, it is easy to change later, and it never puts a power cord where it does not belong.
Why not inside the wall?
An ordinary TV power cord is not made to run inside a wall. Code-rated in-wall power kits exist, but installing one means cutting the drywall, and running power inside the wall, by any kit, is work we do not do. Low-voltage cables such as HDMI can run in the cavity, but a wall can hide insulation, fire blocking between floors, or pipes, and every hole has to be patched and painted if the TV ever moves. A surface raceway avoids all of it.
What a surface raceway is
A raceway is a narrow channel, usually plastic, that sticks or screws to the wall and snaps closed over the cables. Flat versions are only a little thicker than the cords inside. Good ones come with corner pieces and couplers, so the run can turn at the baseboard and stay neat; a hide-TV-wires kit is usually just such a paintable raceway with its corners. Painted the same color as the wall, a raceway from the bottom of the TV to the outlet reads as a thin line rather than a tangle.
Hiding TV wires without opening the wall, step by step
- Plan the TV around the outlet. The shortest, straightest run looks best. If the TV can sit roughly above an existing outlet, the raceway is a single short vertical line.
- Count the cables first. Power, HDMI to each device, maybe an antenna or a sound bar. Pick a raceway wide enough to hold all of them without forcing the lid.
- Mount the TV, then measure. With the TV on the wall, measure from the bottom of the bracket to the top of the baseboard or the outlet, and cut the raceway to fit.
- Fix it straight and level. A raceway that drifts off vertical is more visible than the cables were. Use a level, and screws as well as the adhesive strip on textured walls.
- Paint it to match. Prime and paint the raceway with the wall color, ideally before the cables go in, so the lid closes over dry paint.
Cord covers, sound bars and media consoles
Where the TV sits over a media console, a short raceway down to the top of the console is often all that is needed, because the cables then disappear behind the furniture. A sound bar's cable can share the same raceway. Along a baseboard, a low-profile cord cover painted to match does the same job for a cable that has to cross the room.
The best way to hide TV wires, by situation
- An outlet below the TV. A short painted raceway straight down: the simplest and least visible run.
- No outlet nearby. Raceway down to the baseboard, then a painted cord cover along it to the nearest outlet. If that run is long, an electrician can add an outlet closer to the TV first.
- You want no visible run at all. Then the cables go inside the wall: an in-wall power kit and the low-voltage cables, through holes cut in the drywall. We do not run anything inside the wall; an electrician or a low-voltage installer can.
Two things we will not do
We do not mount a TV above a fireplace, and we do not run cables or power inside the wall. If you want a new outlet behind the TV, that is a job for an electrician; once it is in, we can mount the screen and run the low-voltage cables down to your devices in a painted raceway.
Getting it done
Mounting the TV and hiding the wires can be done in one visit. Tell us the screen size, the wall it goes on and where the nearest outlet is, and text a photo of the wall to our number. The estimate is free, the price is agreed before we drill the mount, and shelves or a mirror can be added to the same visit.