The question is less about the fixture than about the wiring behind it. Hanging a new light where an old one already hangs is a different job from putting light where there was none. One is a swap on a circuit that already exists; the other is new electrical work. Tool Box Pros does the first and not the second, and this article explains where we draw that line and why.
What a light fixture swap is
In a swap, everything that makes the light work is already in place: the electrical box in the ceiling or wall, the cable running to it, the switch on the wall that turns it on. The old fixture comes off and the new one goes on, connected to the same wires in the same box. Nothing is added to the circuit and nothing is moved.
Jobs like these are swaps: a dated flush-mount in the hallway, the builder's brass chandelier over the table, a bathroom vanity light with a cracked shade, a hallway sconce that no longer matches. If the light you are replacing works today and the new one goes in the same spot, it is a swap.
What is not a swap
Some requests sound similar but change the wiring itself. We leave these to a licensed electrician:
- A light where there is none. A pendant over a kitchen island with no box above it, or a fixture in a room that only has a lamp outlet, needs a new box and new cable.
- A new switch or a moved switch. Adding a switch or a dimmer, or moving a switch to the other side of a doorway, changes the circuit.
- Outlets, panels and breakers. New outlets, a full breaker panel, a breaker that keeps tripping: we leave all of it to an electrician.
- Wiring that is damaged or not what it should be. Scorched or cloth-covered insulation that crumbles when bent, aluminum wiring in an older house, a box that is loose or missing, or anything else a normal fixture should not hang on. When we open a fixture and find this, we stop and tell you to call an electrician: the old fixture goes back up if it is safe to, and if not, the wires are capped and covered and the ceiling left safe until an electrician sees it.
Ceiling fans are a special case
A ceiling fan hangs where a light hangs, but it is heavier and it moves, and a box made for a light may not carry it. When someone asks us to replace a ceiling light with a fan, we look at the box with the power off: if it is made and marked for a fan and fixed to the framing, the fan goes up; if not, replacing the box is an electrician's job first.
Replacing an old fan with a new one on the same box is the simplest version, once we confirm the box is marked for a fan and the wiring is there.
Who can replace a light fixture? A quick way to tell
Before you call anyone, three questions sort the job:
- Is there a working light there now? If the old fixture turns on with its switch, the circuit and the box exist. A swap is likely.
- Is the new fixture going in the same place? Same spot, same switch: a swap. A few feet over, or a second fixture beside the first: new wiring.
- Is the new fixture about the same weight, or is the box already rated for a fan? A big chandelier or a fan depends on what the box is rated to carry. Send us the product page and we check before we come.
Yes to all three, and it is the kind of job we do. A no to either of the first two, and you will save time calling an electrician first.
Before you buy the new fixture
- Canopy size. The cover at the ceiling should cover the electrical box completely and be at least as wide as the old one, or the unpainted ring and old screw holes will show.
- Damp or wet rating. A bathroom light needs one rated for damp locations; where shower spray reaches it, one rated for wet locations. The rating is printed on the fixture's label or carton.
How we do a swap
We turn off the breaker for the circuit, not just the wall switch, and check that the fixture is dead before touching a wire. The old fixture comes down, the new bracket goes on the box, the new fixture is connected to the same wires and tucked neatly under the canopy, and the light is tested at its switch.
You buy the fixture; send us its product page and we check what it needs. The estimate is free, the price is agreed before we start, and a light swap can share a visit with the other small jobs on your list.